[Setting]						
Language =	English					
						
//*****************ErrorCode*********************						
[ErrorCode]						
g_ErrorCode_0	=	Command execution success.				
g_ErrorCode_1	=	Cash in entrance.				
g_ErrorCode_2	=	NV config number is not equal to given.				
g_ErrorCode_3	=	No cash in channel when deposit.				
g_ErrorCode_4	=	Error to get cash info.				
g_ErrorCode_5	=	Cash in export.				
g_ErrorCode_6	=	All reject.				
g_ErrorCode_7	=	PC do not get cash info.
g_ErrorCode_10	=	Channel Error!

g_ErrorCode_100	=	Upload complete;				
						
g_ErrorCode_200	=	Can not identify, reject code is 00;				
g_ErrorCode_201	=	Can not identify, reject code is 01;				
g_ErrorCode_202	=	Can not identify, reject code is 02;				
g_ErrorCode_203	=	Can not identify, reject code is 03;				
g_ErrorCode_204	=	Can not identify, reject code is 04;				
g_ErrorCode_205	=	Can not identify, reject code is 05;				
g_ErrorCode_206	=	Can not identify, reject code is 06;				
g_ErrorCode_207	=	Can not identify, reject code is 07;				
g_ErrorCode_208	=	Can not identify, reject code is 08;				
g_ErrorCode_209	=	Can not identify, reject code is 09;				
g_ErrorCode_210	=	Can not identify, reject code is 10;				
g_ErrorCode_211	=	Can not identify, reject code is 11;				
g_ErrorCode_212	=	Can not identify, reject code is 12;				
g_ErrorCode_213	=	Can not identify, reject code is 13;				
g_ErrorCode_214	=	Can not identify, reject code is 14;				
g_ErrorCode_215	=	Can not identify, reject code is 15;				
g_ErrorCode_216	=	Can not identify, reject code is 16;				
g_ErrorCode_217	=	Can not identify, reject code is 17;				
g_ErrorCode_218	=	Can not identify, reject code is 18;				
g_ErrorCode_219	=	Can not identify, reject code is 19;				
g_ErrorCode_220	=	Can not identify, reject code is 20;				
g_ErrorCode_221	=	Can not identify, reject code is 21;				
g_ErrorCode_222	=	Can not identify, reject code is 22;				
g_ErrorCode_223	=	Can not identify, reject code is 23;				
g_ErrorCode_224	=	Can not identify, reject code is 24;				
g_ErrorCode_225	=	Can not identify, reject code is 25;				
g_ErrorCode_226	=	Can not identify, reject code is 26;				
g_ErrorCode_227	=	Can not identify, reject code is 27;				
g_ErrorCode_228	=	Can not identify, reject code is 28;				
g_ErrorCode_229	=	Can not identify, reject code is 29;				
g_ErrorCode_230	=	Can not identify, reject code is 30;				
g_ErrorCode_231	=	Can not identify, reject code is 31;				
g_ErrorCode_232	=	Can not identify, reject code is 32;				
g_ErrorCode_233	=	Can not identify, reject code is 33;				
g_ErrorCode_234	=	Can not identify, reject code is 34;				
g_ErrorCode_235	=	Can not identify, reject code is 35;				
g_ErrorCode_236	=	Can not identify, reject code is 36;				
g_ErrorCode_237	=	Can not identify, reject code is 37;				
g_ErrorCode_238	=	Can not identify, reject code is 38;				
g_ErrorCode_239	=	Can not identify, reject code is 39;				
g_ErrorCode_240	=	Can not identify, reject code is 40;				
g_ErrorCode_241	=	Can not identify, reject code is 41;				
g_ErrorCode_242	=	Can not identify, reject code is 42;				
g_ErrorCode_243	=	Can not identify, reject code is 43;				
g_ErrorCode_244	=	Can not identify, reject code is 44;				
g_ErrorCode_245	=	Can not identify, reject code is 45;				
g_ErrorCode_246	=	Can not identify, reject code is 46;				
g_ErrorCode_247	=	Can not identify, reject code is 47;				
g_ErrorCode_248	=	Can not identify, reject code is 48;				
g_ErrorCode_249	=	Can not identify, reject code is 49;				
g_ErrorCode_250	=	Can not identify, reject code is 50;				
g_ErrorCode_251	=	Can not identify, reject code is 51;				
g_ErrorCode_252	=	Can not identify, reject code is 52;				
g_ErrorCode_253	=	Can not identify, reject code is 53;				
g_ErrorCode_254	=	Can not identify, reject code is 54;				
g_ErrorCode_255	=	Can not identify, reject code is 55;				
g_ErrorCode_256	=	Can not identify, reject code is 56;				
g_ErrorCode_257	=	Can not identify, reject code is 57;				
g_ErrorCode_258	=	Can not identify, reject code is 58;				
g_ErrorCode_259	=	Can not identify, reject code is 59;				
g_ErrorCode_260	=	Can not identify, reject code is 60;				
g_ErrorCode_261	=	Can not identify, reject code is 61;				
g_ErrorCode_262	=	Can not identify, reject code is 62;				
g_ErrorCode_263	=	Can not identify, reject code is 63;				
g_ErrorCode_264	=	Can not identify, reject code is 64;				
g_ErrorCode_265	=	Can not identify, reject code is 65;				
g_ErrorCode_266	=	Can not identify, reject code is 66;				
g_ErrorCode_267	=	Can not identify, reject code is 67;				
g_ErrorCode_268	=	Can not identify, reject code is 68;				
g_ErrorCode_269	=	Can not identify, reject code is 69;				
g_ErrorCode_270	=	Can not identify, reject code is 70;				
g_ErrorCode_271	=	Can not identify, reject code is 71;				
g_ErrorCode_272	=	Can not identify, reject code is 72;				
g_ErrorCode_273	=	Can not identify, reject code is 73;				
g_ErrorCode_274	=	Can not identify, reject code is 74;				
g_ErrorCode_275	=	Can not identify, reject code is 75;				
g_ErrorCode_276	=	Can not identify, reject code is 76;				
g_ErrorCode_277	=	Can not identify, reject code is 77;				
g_ErrorCode_278	=	Can not identify, reject code is 78;				
g_ErrorCode_279	=	Can not identify, reject code is 79;				
g_ErrorCode_280	=	Can not identify, reject code is 80;				
g_ErrorCode_281	=	Can not identify, reject code is 81;				
g_ErrorCode_282	=	Can not identify, reject code is 82;				
g_ErrorCode_283	=	Can not identify, reject code is 83;				
g_ErrorCode_284	=	Can not identify, reject code is 84;				
g_ErrorCode_285	=	Can not identify, reject code is 85;				
g_ErrorCode_286	=	Can not identify, reject code is 86;				
g_ErrorCode_287	=	Can not identify, reject code is 87;				
g_ErrorCode_288	=	Can not identify, reject code is 88;				
g_ErrorCode_289	=	Can not identify, reject code is 89;				
g_ErrorCode_290	=	Can not identify, reject code is 90;				
g_ErrorCode_291	=	Can not identify, reject code is 91;				
g_ErrorCode_292	=	Can not identify, reject code is 92;				
g_ErrorCode_293	=	Can not identify, reject code is 93;				
g_ErrorCode_294	=	Can not identify, reject code is 94;				
g_ErrorCode_295	=	Can not identify, reject code is 95;				
g_ErrorCode_296	=	Can not identify, reject code is 96;				
g_ErrorCode_297	=	Can not identify, reject code is 97;				
g_ErrorCode_298	=	Can not identify, reject code is 98;				
g_ErrorCode_299	=	Can not identify, reject code is 99;				

//Error						
g_ErrorCode_3000	=	Main motor clockwise fail.				
g_ErrorCode_3001	=	Main motor anticlockwise fail.				
g_ErrorCode_3002	=	Push motor clockwise fail.				
g_ErrorCode_3003	=	Push motor anticlockwise fail.				
g_ErrorCode_3004	=	Aline motor clockwise fail.				
g_ErrorCode_3005	=	Aline motor anticlockwise fail.				
g_ErrorCode_3006	=	Electromagnet open fail!				
g_ErrorCode_3007	=	Electromagnet release fail!				

g_ErrorCode_3100	=	CashBox is full.				
g_ErrorCode_3101	=	CashBox is not exist.				
g_ErrorCode_3102	=	NV has not calibrated.				
g_ErrorCode_3103	=	NV has not configured				
g_ErrorCode_3104	=	Idenify timeout.				

g_ErrorCode_3200	=	System error occur when accepting!				
g_ErrorCode_3201	=	Cash in channel when accepting!				
g_ErrorCode_3202	=	Cashbox is full when accepting!				
g_ErrorCode_3203	=	CashClamp is error when accepting!				
g_ErrorCode_3204	=	Amotor regress error when accepting!				

g_ErrorCode_4000	=	CashBox is not exist while initializing.				
g_ErrorCode_4001	=	Cash in channel while initializing.				
g_ErrorCode_4002	=	CashBox exit sensor error whileinitializing.				
g_ErrorCode_4003	=	Electromagnet active error when initializing!				
g_ErrorCode_4004	=	Electromagnet release error when initializing!				
g_ErrorCode_4005	=	Rectify_R sensor error occur when initializing!				
g_ErrorCode_4006	=	Rectify_L sensor error occur when initializing!				
g_ErrorCode_4007	=	Entrance sensor error occur when initializing!	
g_ErrorCode_4008	=	MainMotor forward Error!
g_ErrorCode_4009	=	alien close error!
g_ErrorCode_4010	=	alien open error!			

g_ErrorCode_8000	=	Rectify equipment regress error when inserting notes!				
g_ErrorCode_8001	=	Rectify equipment regress is not at the initially position when inserting notes!				
g_ErrorCode_8002	=	Scan overtime!				
g_ErrorCode_8003	=	Cashbox push_pole regress error!				
g_ErrorCode_8004	=	Cashbox push_pole spread error!				
g_ErrorCode_8005	=	Cash do not entere cashbox!				
g_ErrorCode_8006	=	Cash running out from cashbox when pushing!				
g_ErrorCode_8007	=	CashBox is full				
g_ErrorCode_8008	=	Divide notes overtime!				
g_ErrorCode_8009	=	Notes exit error!				
g_ErrorCode_8010	=	Main chanel seneor error				
g_ErrorCode_8011	=	Cash exit after cashbox occur!				
g_ErrorCode_8012	=	Cshbox is full after Divided notes!				
g_ErrorCode_8013	=	Cashbox push_pole spread error after divided notes fail!				
g_ErrorCode_8014	=	Have Notes run out from cashbox after divided notes fail!				
g_ErrorCode_8015	=	Cashbox push_pole regress error after divided notes fail!				
g_ErrorCode_8016	=	Cash exit after divided notes fail!				

g_ErrorCode_9000	=	Command frame is not correct!				
g_ErrorCode_9001	=	Parameter is not correct!				
g_ErrorCode_9002	=	Check CRC fail.				
g_ErrorCode_9003	=	Command is not support.				

//****************机器状态码 2 Bit********************						
[MacState]						
//Bit 1						
g_MacState_0_0F_00	=	Machine is idle.				
g_MacState_0_0F_01	=	Machine is busy.				
g_MacState_0_0F_02	=	Machine in the error state.				
g_MacState_0_0F_03	=	Machine is ready to accept cash.				
//g_MacState_0_0F_04	=					
//g_MacState_0_0F_05	=					
//g_MacState_0_0F_06	=					
//g_MacState_0_0F_07	=					
g_MacState_0_0F_08	=	Machine had recevied cash and waiting for get cash info command .				

//g_MacState_0_30_00	=	Normal Mode				
g_MacState_0_30_10	=	Test Mode				
g_MacState_0_30_20	=	Tired Mode				

//Bit 2						
g_MacState_1_01_01	=	Cash in the entrance				
g_MacState_1_02_02	=	CashBox is full				
g_MacState_1_04_04	=	CashBox is not exist.				
//g_MacState_1_08_08	=					
//g_MacState_1_10_10	=					
//g_MacState_1_20_20	=					
//g_MacState_1_40_40	=					
//g_MacState_1_80_80	=					

[String]						
//*****************菜单及TAB文字*********************						
IDD_DIALOG_TAB1	=	GeneralTest				
IDD_DIALOG_TAB2	=	CommandTest				
IDD_DIALOG_TAB3	=	TiredTest				
IDD_DIALOG_TAB4	=	Recognise				
IDD_DIALOG_TAB5	=	Upload&Download				

//Menu						
IDR_MENU_FILE	=	&File				
IDR_MENU_LOCA	=	Tool&Path				
IDR_MENU_ERROR	=	E&rrorCode				
IDR_MENU_EXIT	=	&Exit				

IDR_MENU_SETTING	=	&Setting				
IDR_MENU_COMM	=	C&ommunication				
IDR_MENU_LANGUE	=	&Language				
IDR_MENU_ENGLISH	=	E&nglish				
IDR_MENU_CHINESE	=	Ch&inese				
IDR_MENU_ADV_OP	=	Ad&vanced OP	
IDR_MENU_DEV_TYPE = Device Type			

IDR_MENU_CONNECT	=	&Connect				
IDR_MENU_DISCONNECT	=	&DisConnect				

IDR_MENU_HELP	=	&Help				
IDR_MENU_ABOUT	=	&About				

IDD130_-1=						
IDD100_Title=About BA08TestTool						
IDD100_1035=BA08TestTool Ver stdV2.0B16						
IDD100_1036=Copyright (C) 2015 GRG Banking Equipment Co. Ltd						
IDD100_1=OK	

//*****************Login*********************
IDD146_Title=Login
IDD146_1=OK
IDD146_2=Cancel
IDD146_1037=UserName:
IDD146_1038=Password:
IDD146_1039=
IDD146_1040=					

//*****************Main*********************						
IDD102_Title=BA08TestTool						
IDD102_1000=Tab1						
IDD102_1019=						

//*****************DialogTab1*********************						
IDD130_Title=						
IDD130_1006=Entry						
IDD130_1007=CIS_F						
IDD130_1008=CIS_B						
IDD130_1009=AL_L						
IDD130_1010=AL_R						
IDD130_1019=DIV_F						
IDD130_1043=DIV_B						
IDD130_1012=CBEntry						
IDD130_1011=CBExist						
IDD130_1013=					
IDD130_1057=						
IDD130_1015=Refresh						
IDD130_1083=SensorState						
IDD130_1023=Cancel						
IDD130_1024=Deposit						
IDD130_1031=CleanOut						
IDD130_1032=CleanIn						
IDD130_1034=Num    Time    Denomination   Length  Direction:						
IDD130_1038= 						
IDD130_1082=Trade						
IDD130_1030=PartTest						
IDD130_1091=Command						
IDD130_1037=Probability or Count:						
IDD130_1041=0						
IDD130_1001=UploadRejImg						
IDD130_1002=RecordInfo						
IDD130_1017=PreDeposit						
IDD130_1020=Deposit						
IDD130_1018=ExitPreDeposit						
IDD130_1021=CancelDeposit						
IDD130_1016=Initialize						
IDD130_1025=						
IDD130_1026=SetTestMode						
IDD130_1022=GetMacState						
IDD130_1027=ExitTestMode						
IDD130_1029=GetVersion						
IDD130_1028=ResetProbability						
IDD130_1042=						
IDD130_1092=Result		
IDD130_1003=UploadOCR	
IDD130_65534=AutoUpLoad			

//*****************DialogTab2*********************						
IDD135_Title=						
IDD135_1003=ResetProgram						
IDD135_1012=AdjBlackVoltage						
IDD135_1013=AdjWhiteVoltage						
IDD135_1014=CIS_ON						
IDD135_1017=PreDeposit						
IDD135_1020=Deposit						
IDD135_1025=GetCashInfo						
IDD135_1018=ExitPreDeposit						
IDD135_1019=SetBaud_115200						
IDD135_1021=CancelDeposit						
IDD135_1022=SetBaud_19600						
IDD135_1016=Initialize						
IDD135_1026=SetTestMode						
IDD135_1015=GetMacState						
IDD135_1027=ExitTestMode						
IDD135_1028=						
IDD135_1029=GetVersion						
IDD135_1031=CleanOut						
IDD135_1032=CleanIn						
IDD135_1042=						

//*****************DialogTab3*********************						
IDD139_Title=						
IDD139_1032=0						
IDD139_1033=0						
IDD139_1034=0						
IDD139_1086=MacCycleStart						
IDD139_1047=MacCycleStop						
IDD139_1085=						
IDD139_1089=Interval Time(ms):						
IDD139_1048=120000						
IDD139_1088=Cycle Count:						
IDD139_1090=Machine Life Test          						
IDD139_1103=EMagnetCycleStart						
IDD139_1104=EMagnetCycleStop						
IDD139_1109=EMagnet Cycle Test						
IDD139_1108=Cycle Count:						
IDD139_1105=Pause					
IDD139_1110=Hold Time(ms):						
IDD139_1106=150						
IDD139_1111=Release Time(ms):						
IDD139_1107=300					
IDD139_1042=						
IDD139_1094=Result						
IDD139_1113=CustomTest						
IDD139_1020=List1						
IDD139_1021=List1						
IDD139_1025=						
IDD139_1112=CustomCycStart						
IDD139_1114=CustomStartOnce						
IDD139_1115=Cycle Count:						
IDD139_1116=CycleStop	
IDD139_1117=continue
IDD139_1118=Pause
IDD139_1119=continue
IDD139_1120=Pause
IDD139_1121=Continue
IDD139_1124=CleanAllCount					

//*****************DialogTab4*********************						
IDD140_Title=						
IDD140_1012=AdjBlackVoltage						
IDD140_1013=AdjWhiteVoltage	
IDD140_1080=AdjResultCheck					
IDD140_1002=AdjVoltage						
IDD140_1003=UploadImage						
IDD140_1004=RED						
IDD140_1005=IRF						
IDD140_1006=IRT						
IDD140_1007=MAG						
IDD140_1008=SelectAll						
IDD140_1014=UploadImg						
IDD140_1009=ImageData						
IDD140_1042=						
IDD140_1094=Result						
IDD140_1011=ReadConfig						
IDD140_1015=RecList						
IDD140_1016=SetConfig						
IDD140_1017=						
IDD140_1018=						
IDD140_1025=						
IDD140_1026=RecConfig						
IDD140_1028=List1						
IDD140_1029=						
IDD140_1053=Progress1						

//*****************DialogTab5*********************						
IDD141_Title=						
IDD141_1025=						
IDD141_1030=60						
IDD141_1031=BreakUpload						
IDD141_1049=OpenFile						
IDD141_1050=DownLoad						
IDD141_1051=Cancle						
IDD141_1052=						
IDD141_1053=Progress1						
IDD141_1054=WaitTime:						
IDD141_1055=						
IDD141_1042=						
IDD141_1046=UploadAllLog						
IDD141_1044=UploadOneLog						
IDD141_1045=						
IDD141_1093=UploadLog						
IDD141_1092=File Download						
IDD141_1094=Result						

//*****************PartTest*********************						
IDD142_Title=PartTest						
IDD142_1071=Quit						
IDD142_1058=Clockwise						
IDD142_1059=AntiClock						
IDD142_1060=Stop						
IDD142_1061=Clockwise						
IDD142_1062=AntiClock						
IDD142_1063=Stop						
IDD142_1064=Clockwise						
IDD142_1065=AntiClock						
IDD142_1066=Stop						
IDD142_1067=150						
IDD142_1068=TimeLimit(ms):						
IDD142_1069=Open						
IDD142_1070=Close						
IDD142_1072=Clockwise						
IDD142_1073=AntiClock						
IDD142_1074=Stop						
IDD142_1099=Push						
IDD142_1100=Retract						
IDD142_1101=Reset						
IDD142_1102=PushMotorTest						
IDD142_1021=MainMotor:						
IDD142_1022=AlineMotor:						
IDD142_1023=PushMotor:						
IDD142_1024=EnterMotor:						
IDD142_1025=EntEMagnet:						
IDD142_1103=PartControl		
IDD142_1105=MarkDiskTest
IDD142_1077=MarkDiskTest:	
IDD142_1078=MotorForceTest:			

//*****************Communication*********************						
IDD144_Title=Communication						
IDD144_1043=PCCom:						
IDD144_1044=						
IDD144_1045=BAUD:						
IDD144_1046=						
IDD144_1023=Connect by USB						
IDD144_1=OK						
IDD144_2=Cancel						

//*****************EditBox*********************						
IDD143_Title=EditBox						
IDD143_1=OK						
IDD143_2=Cancel						
IDD143_1022=						


//******************g_strCommon*************************						
//公用文字						
g_strCommon[0]	=	Send command fail, please check the communication.				
g_strCommon[1]	=	Busy				
g_strCommon[2]	=	Warning				
g_strCommon[3]	=	Information				
g_strCommon[4]	=	Error				
g_strCommon[5]	=	Machine is in good condition.				
g_strCommon[6]	=	Elapsed time:				
g_strCommon[7]	=	ErrorCode:				
g_strCommon[8]	=	Creat folder fail!				
g_strCommon[9]	=	Please enter your password!
g_strCommon[10]	=	END			

//通讯对话框文字						
g_strCommunication[0]	=	Read config fail!				
g_strCommunication[1]	=	Read item COM ID fial.				
g_strCommunication[2]	=	Read Item COMBaud fail				
g_strCommunication[3]	=	Error in item 				
g_strCommunication[4]	=	Please select COMID!				
g_strCommunication[5]	=	BA08 connect with PC by COM:				
g_strCommunication[6]	=	Open COM fail!				
g_strCommunication[7]	=	BA08 connect with PC by USB:				
g_strCommunication[8]	=	Set USB fail!				
g_strCommunication[9]	=	Set communication fail!				
g_strCommunication[10]	=	END				
						
//****************g_strTab1***************************						
//TAB1自定义文字						
g_strTab1[0]	=	GetMacState				
g_strTab1[1]	=	Cancel				
g_strTab1[2]	=	Init				
g_strTab1[3]	=	GetVersion				
g_strTab1[4]	=	Main board version:				
g_strTab1[5]	=	Arithmetic version:				
g_strTab1[6]	=	ModeSetting				
g_strTab1[7]	=	Init command is working.				
g_strTab1[8]	=	Prepare deposit				
g_strTab1[9]	=	ExitPreDeposit				
g_strTab1[10]	=	Deposit				
g_strTab1[11]	=	GetCashInfo				
g_strTab1[12]	=	clockwise				
g_strTab1[13]	=	anticlockwise				
g_strTab1[14]	=	close				
g_strTab1[15]	=	open				
g_strTab1[16]	=	close				
g_strTab1[17]	=	MainMotor				
g_strTab1[18]	=	AlineMotor				
g_strTab1[19]	=	PushMotor				
g_strTab1[20]	=	EntMotor				
g_strTab1[21]	=	EntElectromagnet				
g_strTab1[22]	=	push_pole spread				
g_strTab1[23]	=	push_pole regress				
g_strTab1[24]	=	push_pole reset				
g_strTab1[25]	=	CashBox is exist，Main motor clockwise maybe destroy some parts!\n If you want to continue, please check "OK".				
g_strTab1[26]	=	CleanOut				
g_strTab1[27]	=	CleanIntoBox	
g_strTab1[28]	=	MarkDiskTest 
g_strTab1[29]	=	MotorForce			
g_strTab1[30]	=	END				
						
//****************g_strTab3***************************						
g_strTab3[0]	=	Count,         Date,Time,             Command,  ReturnCode, Sensor, State,UseTime, ReturnInfo				
g_strTab3[1]	=	TiredFlow				
g_strTab3[2]	=	TireItem				
g_strTab3[3]	=	1.MMotorCW				
g_strTab3[4]	=	2.MMotorCCW				
g_strTab3[5]	=	3.MMotorClose				
g_strTab3[6]	=	4.AMotorCW				
g_strTab3[7]	=	5.AMotorCCW				
g_strTab3[8]	=	6.AMotorClose				
g_strTab3[9]	=	7.PMotorCW				
g_strTab3[10]	=	8.PMotorCCW				
g_strTab3[11]	=	9.PMotorClose				
g_strTab3[12]	=	A.EMOpen				
g_strTab3[13]	=	B.ENRelease				
g_strTab3[14]	=	C.PolePUSH				
g_strTab3[15]	=	D.PoleRetract				
g_strTab3[16]	=	E.PoleReset				
g_strTab3[17]	=	F.Sleep(10s)				
g_strTab3[18]	=	G.Sleep(5s)				
g_strTab3[19]	=	H.Sleep(1s)				
g_strTab3[20]	=	I.Sleep(0.5s)				
g_strTab3[21]	=	J.Sleep(0.1s)				
g_strTab3[22]	=	K.Sleep(50ms)				
g_strTab3[23]	=	L.Sleep(10ms)				
g_strTab3[24]	=	M.Sleep(5s)				
g_strTab3[25]	=	N.Sleep(1s)				
g_strTab3[26]	=	Tired test is working!				
g_strTab3[27]	=	END				
						
//****************g_strTab4***************************						
g_strTab4[0]	=	Name				
g_strTab4[1]	=	UploadImage				
g_strTab4[2]	=	SetBaud(19600)				
g_strTab4[3]	=	SetBaud(115200)				
g_strTab4[4]	=	Upload RED				
g_strTab4[5]	=	Upload IRF				
g_strTab4[6]	=	Upload IRT				
g_strTab4[7]	=	Upload Mag				
g_strTab4[8]	=	Create image folder fail！				
g_strTab4[9] 	=	Upload complete.				
g_strTab4[10]	=	Time:				
g_strTab4[11]	=	All images upload complete.				
g_strTab4[12]	=	Totle time:				
g_strTab4[13]	=	Upload break				
g_strTab4[14]	=	Image1 adjust mode				
g_strTab4[15]	=	Image2 adjust mode				
g_strTab4[16]	=	Please use standard to complete the calibration.				
g_strTab4[17]	=	Uploading, please wait!				
g_strTab4[18]	=	Get CIS image parameter
g_strTab4[19]	=	Please use yellow standard to complete the calibration.
g_strTab4[20]   =   Success!
g_strTab4[21]   =   Fail!
g_strTab4[22]   =   END		
						
//****************g_strTab5***************************						
g_strTab5[0]	=	Please select the correct file!				
g_strTab5[1]	=	Dowmload main board program.				
g_strTab5[2]	=	If dowmload do not begin in 10 second, it may be completed with power off and power on.				
g_strTab5[3]	=	Change baud fail				
g_strTab5[4]	=	Open file fail, please check the file.				
g_strTab5[5]	=	Download begin>>>				
g_strTab5[6]	=	Download cancel!				
g_strTab5[7]	=	Download complete, being updated.				
g_strTab5[8]	=	Update complete!				
g_strTab5[9]	=	Download cancel, please wait for the initializtion of machine.				
g_strTab5[10]	=	Create log file fail.				
g_strTab5[11]	=	Upload begin.				
g_strTab5[12]	=	Upload Log.				
g_strTab5[13]	=	Current number:				
g_strTab5[14]	=	Log upload complete.				
g_strTab5[15]	=	Log upload cancel.				
g_strTab5[16]	=	Log is being uploaded.				
g_strTab5[17]	=	Program is being downloaded.				
g_strTab5[18]	= Download fail!
g_strTab5[19]	= Update fail!
g_strTab5[20]	= END			
